Subaru Legacy Rear Wheel Bearing Replacement: A Comprehensive Guide
Subaru Legacy Rear Wheel Bearing Replacement: A Comprehensive Guide
Introduction
Are you facing a noisy or shaky ride in your Subaru Legacy? It might be a sign of a failing rear wheel bearing. Replacing a rear wheel bearing can be a daunting task, but with the right tools and a little patience, you can do it yourself and save hundreds of dollars.
Symptoms of a Failing Rear Wheel Bearing
* Growling or humming noise that increases with speed
* Squealing when turning
* Vibration in the steering wheel or seat
* Uneven tire wear
Tools and Materials Needed
* New rear wheel bearing
* Bearing puller
* Slide hammer
* Socket wrench set
* Torque wrench
* Axle nut socket
* Jack stands
* Safety glasses
* Gloves
Step-by-Step Instructions
1. Safety First!
Before starting any work, park your car on a level surface, engage the parking brake, and wear safety glasses and gloves.
2. Remove the Wheel
Use a jack to lift the rear of the car. Support the car with jack stands. Remove the lug nuts and take off the wheel.
3. Remove the Brake Caliper
Unbolt the brake caliper and carefully hang it on the suspension with a wire to avoid straining the brake line.
4. Remove the Rotor
Use a socket wrench to remove the rotor.
5. Remove the Axle Nut
Use an axle nut socket to remove the axle nut. A helper can apply the brakes to keep the axle from spinning.
6. Remove the Hub Assembly
Attach the bearing puller to the hub assembly and use the slide hammer to remove it.
7. Press in the New Bearing
Apply some anti-seize to the new bearing and press it into the hub assembly. Make sure it sits flush with the surface.
8. Reassemble
Reinstall the hub assembly, axle nut, rotor, brake caliper, and wheel. Tighten all nuts and bolts to the specified torque.
9. Road Test
Take your car for a short drive to ensure everything is working properly. Listen for any unusual noises or vibrations.
Cost of Replacement
The cost of replacing a rear wheel bearing on a Subaru Legacy can vary depending on the labor rate of the mechanic and the parts used. According to RepairPal, the average cost is between $350 and $500.
Tips for a Successful Replacement
* Use high-quality parts.
* Follow the instructions carefully.
* Torque all bolts and nuts to the specified specifications.
* If youre not comfortable performing the replacement yourself, take your car to a mechanic.
#keyword #
* Rear wheel bearing replacement is a common repair on Subaru Legacys.
* The symptoms of a failing rear wheel bearing can include a growling or humming noise, squealing when turning, vibration, and uneven tire wear.
* Its important to replace a failed rear wheel bearing as soon as possible to avoid further damage to your car.
* The cost of replacing a rear wheel bearing on a Subaru Legacy can vary depending on the labor rate of the mechanic and the parts used.
* With the right tools and a little patience, you can replace a rear wheel bearing on your Subaru Legacy yourself.
Story Case
"I was driving down the highway when I heard a loud grinding noise coming from the back of my car. I pulled over and checked the tires, but they all looked fine. I started driving again, and the noise got worse. I took my car to a mechanic, and he told me I needed to replace the rear wheel bearing. I was worried about the cost, but the mechanic was able to do the replacement for a reasonable price. Im glad I got the bearing replaced because the noise was driving me crazy!"
Humorous Language
"Replacing a rear wheel bearing is like changing a light bulb, but with more grease and cursing."
Conclusion
Replacing a rear wheel bearing on a Subaru Legacy can be a challenging task, but its not impossible. With the right tools and a little patience, you can save yourself a lot of money by doing it yourself. Be sure to follow the instructions carefully and torque all nuts and bolts to the specified specifications. If you have any questions, dont hesitate to ask for help from a professional.