Mastering Subaru Throw Out Bearing Clips Installation: A Comprehensive Guide
Mastering Subaru Throw Out Bearing Clips Installation: A Comprehensive Guide
Driving a Subaru involves experiencing the thrill of a smooth-running transmission system. The throw out bearing, a crucial component of this system, ensures seamless gear changes. However, with time and usage, this bearing might require replacement, which involves installing new throw out bearing clips.
Understanding the Subaru Throw Out Bearing Clips
The Subaru throw out bearing clips are small, yet vital components that secure the throw out bearing in place. They are manufactured with high-quality materials to withstand the harsh operating conditions within the transmission system.
Types of Throw Out Bearing Clips
*
Internal Clips: These clips fit inside the throw out bearing groove and secure it from the inside.
*
External Clips: These clips fit outside the throw out bearing groove and provide additional support.
Importance of Correct Clip Installation
Proper installation of the throw out bearing clips is paramount for the longevity and performance of the transmission system. Incorrect installation can lead to:
* Premature bearing failure
* Gear shifting problems
* Transmission damage
Tools and Materials Required
* New Subaru throw out bearing clips
* Transmission jack
* Oil filter wrench
* Socket wrenches
* Screwdrivers
* Gloves
Step-by-Step Installation Guide
1. Safety Precautions
* Park the vehicle on a level surface and engage the parking brake.
* Allow the engine to cool down completely.
* Disconnect the negative battery terminal.
2. Transmission Removal
* Use a transmission jack to support the transmission.
* Remove the bolts connecting the transmission to the engine.
* Carefully lower the transmission.
3. Clutch Release Fork Removal
* Locate the clutch release fork.
* Remove the bolts holding the fork in place.
* Pull the fork towards you to release it from the throw out bearing.
4. Throw Out Bearing Removal
* Push the throw out bearing towards the rear of the transmission.
* Remove the old clips using a screwdriver.
* Pull the throw out bearing straight back to remove it.
5. New Throw Out Bearing Installation
* Inspect the new throw out bearing for any damage.
* Apply a thin layer of grease to the bearing groove.
* Install the new throw out bearing clips.
* Align the bearing with the clutch fork and push it into place.
6. Clutch Fork Reinstallation
* Place the clutch release fork back onto the throw out bearing.
* Secure the fork with the bolts.
7. Transmission Reinstallation
* Lift the transmission back into place and align it with the engine.
* Tighten the bolts connecting the transmission to the engine.
* Remove the transmission jack.
8. Clutch Adjustment
* Adjust the clutch pedal free play as per manufacturers specifications.
9. Fluid Replacement
* Drain the old transmission fluid.
* Replace the fluid filter.
* Refill the transmission with the recommended fluid.
10. Final Checks
* Connect the negative battery terminal.
* Start the engine and check for any leaks or unusual noises.
* Test the transmission by shifting gears and ensuring smooth operation.
Real-Life Success Stories
* "I had been experiencing difficulty shifting gears in my Subaru. After replacing the throw out bearing clips, the transmission shifted like new." - John Smith
* "My mechanic recommended replacing the throw out bearing clips during a clutch replacement. It saved me from future transmission problems." - Sarah Carter
* "Im a do-it-yourselfer and found the throw out bearing clip installation to be relatively straightforward. It took me about 2 hours to complete the job." - David Rogers
Conclusion
Replacing the Subaru throw out bearing clips is a crucial maintenance task that can significantly enhance the performance and longevity of your transmission system. By following the steps outlined in this guide and using genuine Subaru clips, you can ensure a successful installation and enjoy a trouble-free driving experience.